|
 |
The Power Engine 60 is an all-purpose,
multi-function, powered extension cabinet. Available in 3 configurations,
each packs 60 watts of transparent power. They can be used with
any direct recording device or pre-amp, analog or digital, tube
or solid state, in stompbox or rackmount formats --including our
very own line of SansAmps. When plugging your favorite device into
a Power Engine, the tone is unaffected. So there's no need to labor
over readjusting all your parameters that would otherwise be colored
by a conventional amp.
|
These handsome cabinets perfectly complement
our line of Trademark combo amps. The Power Engine 60 will
accept XLR and 1/4” inputs and includes a balanced XLR
output to ‘daisy-chain’ with other Power Engine
60s. Knowing that not all rooms are created acoustically perfect,
you can compensate for less than ideal environments by adjusting
the on-board, active three-band EQ.
Wherever your tones come from, make the Power
Engine 60 your destination for portable, pure reproduction. |
|
|
Click to enlarge
 |
1x12 -
Loaded with Celestion®
Seventy80 Speaker,
80 Watts/8 Ohms |
2x12 -
Loaded with
Celestion® Seventy80 Speakers
80 Watts/16 Ohms Each,
8 Ohms Total Load |
4x10 -
Loaded with custom-designed
Eminence® Speakers
50 Watts/8 Ohms each,
8 Ohms Total Load |
|
| PW-60
ADDITIONAL FEATURES |
With
ground-independent inputs and output, there’s no
limit to how much power you can have. You can chain hundreds
of Power Engine 60s together to make a giant wall of power
(although some might view that as excessive).
Power
Engines can also facilitate stereo configurations --
with a traditional amp or with a pre-amp and stereo processor.
View
Power Engine 60
Hook-up Diagrams
Mono Stereo
|
| SPECIFICATIONS |
| Model
Number |
PW60 |
| Input
Impedance: |
10kOhms |
| Nominal
Input Level |
-20dBm
to +4dBm |
| Optimal
Output Load: |
8
Ohms |
| Power
Output: |
60W |
| Maximum
Power Consumption: |
120W |
| AC
Input Power (factory set): |
100V,
117V, 230V, 240V |
| Cycles: |
50/60 Hz |
| Speaker: |
(1x12) Celestion® Seventy80 Model #CT2112-8
12", 80W, 8Ω
(2x12) Celestion® Seventy80 Model #CT2112-16
12", 80W,
16Ω each 8Ω Total Load
(4x10) Eminence® Model #ET-2110-8, 10",
50W, 8Ω each,
8Ω Total Load |
| Cabinet
Dimensions: |
(1x12) 20"l x 11"w x 18"h
(2x12)
26"l x 12"w x 19"h
(4x10)
22"l x 12"w x 22"h |
| Weight:
|
1x12:
33 lbs; 2x12: 39 lbs; 4x10: 43 lbs |
| Note:
With on-going product development and improvements, specifications
and/or the cosmetic appearance of this unit may change without
prior notice. Replacement parts are available, i.e., knobs,
logo plate, handles, etc. For more information, please contact
your authorized dealer or Tech 21. |
|
|
| |
|
 |
