Via MIDI, you can load and off-load presets, map program locations, and select MIDI channels (including Omni Mode). Remote program changes can also be made via MIDI (including Tech 21’s own equally player-friendly MIDI Mouse footcontroller). Other features include dual 1/4” and XLR outputs for stereo processing, either of which can be set at line or instrument level, and used simultaneously. The non-glare, 3-digit LED display is readable from any angle, in daylight or darkness.


Click here for info on our original
SansAmp PSA-1

Our popular SansAmp PSA-1 underwent an internal redesign and is now known as SansAmp PSA-1.1. While the 100% analog signal path and functionality remain the same, during the design process it became possible to include a few new features: an on/off switch on the front panel, more program locations (there are now 128), a master volume control, an XLR ground lift switch, phantom power MIDI input, and a dedicated headphone output.

 

SOUND SAMPLES

Considered a staple in professional recording studios, the SansAmp PSA has been used on major releases and worldwide tours for multiple applications and instruments, including horns, vocals and drums. Players, engineers and producers alike find the SansAmp PSA very simple to operate. To program, you just tweak the knobs and save. Parameters are adjusted in real time with traditional analog potentiometers. The digital memory stores the positions of the pots. With 256 incremental steps, each rotary control increases and decreases in a smooth linear fashion.

The exceptionally versatile SansAmp PSA-1.1 offers 49 factory presets of the most recognized vintage and modern tube amp sounds for guitar and bass, and 77 user-definable locations. A Universal Output Section enables the signal to be compatible with full range systems as well as guitar/bass speaker cabinets. With the SansAmp PSA-1.1, you can record direct to tape, as well as warm up existing tracks in mixdowns. For live applications, it can be used as a pre-amp, “monster direct box” to P.A. system, and as an outboard processor.


OPTIONAL ACCESSORIES

Midi Mouse
Exceptionally player-friendly MIDI foot controller.

Power Engine 300
 Power Engine 400
2U Rackmount Instrument Power Amplifiers .
Power Engine 60
1x12 open-back cabinet with 60 watts of transparent power.
SPECIFICATIONS
Model Number
 PSA-1.1
Input Impedance-Input 1
 1MegOhm
Input Impedance-Input 2
 4.7MegOhm
Input Level-Input 1
 -10dB
Input Level-Input 2
 Switchable to -10dB or 0dB range
Output Impedance-1/4”
 1K Ohm min
Output Impedance-XLRs
 600 Ohm min
Output Level-1/4”
 Switchable to -10dB or 0dB range
Output Level-XLR
 Switchable to -10dB or 0dB range
Maximum Output Level
 +10dB or better
XLR Pin Configuration
 Pin 1: Ground / Pin 2: In phase / Pin 3: Reverse phase
Effects Loop Send
 1K Ohm min, -10dB, Mono
Effects Loop Return
 100K Ohm min, -10dB, Stereo/Mono
Low Frequency Response
 10Hz or better*
High Frequency Response
 Harmonic content, 20kHz or better*
Maximum Power Consumption
 5 Watts
AC Input Power (factory set)
100V, 117V, 230V, 240V
Cycles
 50/60 Hz
NOTE: Each unit is constructed for specific voltages. AC power cannot be switched.
Enclosure
 Aluminum and steel, fully shielded
Dimensions
 19.0”w x 1.75”h x 5”d / Overall depth: 6”
Weight
 5 lbs.





©2007 TECH 21 USA, Inc.