|
 |
Dimensions:
19"w x 1.5"h x 5.25"d (6.25"d overall)
Weight: 5 lbs.
| OPTIONAL
ACCESSORIES |
| Alternating
(On/Off) Footswitch
(Model #FSPL)
Bass
Power Engine 60
60-watts of transparent power in a 1x12 extension cab
4x10
Bass Speaker Cabinet (Model #B410):
• 8 Ohms / 400 watts handling
• Cast-frame, custom designed speakers
• Chrome-plated steel grill
• Rear vented
• Neutrik Speakon connectors and 1/4" jacks
• Measures 24"w x 24"h x 16"d and weighs
70 lbs. |
|
|
The 1U rackmount SansAmp RBI is a pumped-up, expanded version of
our popular SansAmp Bass Driver DI pedal. In addition to Drive,
Presence, and active Bass and Treble controls, the SansAmp RBI has
a dedicated Mid control and an XLR Output Level control for optimum
performance with PA systems. It also features an Effect Loop with
a Mix 50/50 switch (for parallel or series operation), an XLR output
with selectable levels, and a buffered direct XLR output to provide
a dry signal. Include access to the most coveted classic and modern
bass tones, with unlimited freedom to create your own, and the SansAmp
RBI is practically mandatory for any bass player.
|
EXCEPTIONAL
FLEXIBILITY |
|
Armed with a truckload of bass amp rigs in a single rackspace,
you can travel as heavy or light as you like:
- Show
up at any studio with just a SansAmp RBI and plug directly
into the board
for premium tones without miking.
- Gig
with the SansAmp RBI directly through the house PA without
using a separate amp.
- Go
to a gig with a SansAmp RBI, a Bass Power Engine 60 (see
optional accessories below)
and run directly through the house P.A. system.
- Take
a more "traditional" set-up to a gig with a SansAmp
RBI, power amp and
speaker cabinet, and run directly through the house P.A.
system.
|
Click to enlarge
RBI
ADITIONAL FEATURES |
Drive
adjusts the overall amount of gain and overdrive.
Presence
brings out the upper harmonic content and attack.
Blend
allows you to mix the direct instrument signal with SansAmp
Tube Amplifier Emulation circuitry.
Active
Bass and Treble controls cut or boost ±12dB.
Dedicated
Mid control, cut or boost ±12dB.
Individual
Level control for the XLR out to optimize your amp's output
relative to the P.A. system.
Effects
Loop.
Mix
50/50 switch to configure the Effects Loop in series or parallel.
1/4"
rear input and XLR output with selectable levels.
Buffered
uneffected XLR output to run a dry signal to a separate channel.
Footswitch
input to engage unit.
Footswitch
output to chain and toggle between another SansAmp RBI.
(If you prefer programmability, you may want to consider our
own "not-just-for-guitar" SansAmp
PSA. There are 10 presets devoted to bass and 49 user-definable
locations for storing custom settings.) |
|
|
 |
